Models: TTNC-451 | TTNC-631 | TTNC-1001 | TTNC-1500
These large tilting tables feature massive hydraulic clamping torque and enable 5-face and slanted-hole machining with single chucking of workpiece. They are suitable for machining of component parts for heavy industries such as aerospace, power generator and construction.
|Max Table Speed||rpm||16.7||8.3||16.7||8.3||5.6||1.4||2.7||1.4|
|Clamp Torque @ 72psi||Nm (ft. lbs.)|
Allowable work weight
0-90º tilt angle
ASK AN EXPERT
Determine which rotary table is the best fit for you.
features & advantages
TORQUE TRANSFER EFFICIENCY
The Tsudakoma dual lead gearing system features the largest tooth engagement of any rotary table manufacturer. This generates up to 85% torque transfer efficiency.
OVERSIZE WORM WHEEL
The Tsudakoma worm wheel uses an oversize diameter pitch circle resulting in reduced pressure on the contact surface compared to a conventional gearing system.
CROSS ROLLER BEARINGS
All Tsudakoma rotary tables and indexers use ultra precision cross roller bearings. Four times more rigid than angular contact bearings.
Tsudakoma uses proprietary high tensile strength brass to build the gears. This enables exceptionally smooth cutting due to the inherent lubricating properties.
Tsudakoma utilizes full depth engagement with a larger gear module resulting in a larger surface area yielding a substantially stronger worm gear system.
Koma Precision, Inc. provides comprehensive rotary table selection assistance. Torque calculations, interference drawings and 3D models are a value added service offered to each customer.