Models: RWE-160 TPC | RWE-200 TPC
PACKAGED WITH CONTROLLER FOR PLUG & PLAY OPERATION
RWE-Series indexers are packaged with a TPC-Jr NC controller for plug & play operation. The RWE indexers are attractively priced, yet retain the high performance build characteristics found on full 4th axis Tsudakoma rotary tables.
|TABLE MODEL||RWE-160 TPC||RWE-200 TPC|
|MAXIMUM TABLE SPEED||rpm||50||41.7|
|CLAMP TORQUE @ 72psi||Nm (ft. lbs.)||156 (115)||294 (217)|
|INDEXING ACCURACY||arc sec.||±22.5||±22.5|
ALLOWABLE WORK WEIGHT
|165 (330)||220 (550)|
features & advantages
Determine which rotary table is the best fit for you.
ASK AN EXPERT
TORQUE TRANSFER EFFICIENCY
The Tsudakoma dual lead gearing system features the largest tooth engagement of any rotary table manufacturer. This generates up to 85% torque transfer efficiency.
OVERSIZE WORM WHEEL
The Tsudakoma worm wheel uses an oversize diameter pitch circle resulting in reduced pressure on the contact surface compared to a conventional gearing system.
CROSS ROLLER BEARINGS
All Tsudakoma rotary tables and indexers use ultra precision cross roller bearings. Four times more rigid than angular contact bearings.
Tsudakoma uses proprietary high tensile strength brass to build the gears. This enables exceptionally smooth cutting due to the inherent lubricating properties.
Tsudakoma utilizes full depth engagement with a larger gear module resulting in a larger surface area yielding a substantially stronger worm gear system.
Koma Precision, Inc. provides comprehensive rotary table selection assistance. Torque calculations, interference drawings and 3D models are a value added service offered to each customer.