Tsudakoma TTNC-101-4 Special Rotary Table with HSK Hydraulic Clamping Pods


TSUDAKOMA TTNC-101- 4 with HSK-100 HYDRAULIC CLAMPING PODS

TTNC-101- 4
FULL 4TH & 5TH AXIS
4 SPINDLE ROTARY TABLE
CUSTOM MADE FOR A
TWIN SPINDLE ROBOTICALLY
ATTENDED VMC.

TSUDAKOMA TTNC-101- 4 SPECIAL ROTARY TABLE
(STANDARD TABLE DIMENSIONS LISTED BELOW)

Model		TTNC-101-4
Tilt Range		-110° ~ +110°
Minimum table center distance		120
Spindle outer diameter		80h7
Table diameter		115 (optional)
Table height at 0° position		275 (295 w/faceplate)
Center Height at 90° position		200
Center bore	Nose dia.	50H7
	Thru dia.	30
Table T-slot width		-
Guide block width		18h7
Servo motor-Fanuc*-3000rpm		Rotary	Tilt
		Alpha 8i	Alpha 8i
Speed reduction ratio		1/60	1/90
Max. table rotation speed with 3000 rpm motor		50	33.3
Clamp system		Pneumatic	Hydraulic
Clamp torque Nm (ft.lbs.)		80 (59) @72psi	980 (722) @500psi
Indexing accuracy (arc sec.)		±30	-
Repeatability (arc sec.)		±4	-
Tilting accuracy (0° ~ +90° tilt angle) (arc sec)		-	±30
Tilting Repeatability (arc sec)		-	±2
Net weight kg (lbs.)		370 (814)
Allowable wheel torque (Rotary axis)		176Nm (130 ft.lbs.)
Allowable work weight kg (lbs)	0° tilt angle	20 (44)
	0° - 90° tilt angle	20 (44)
Allowable work moment	WxL Nm (ft lbs)	254.8 (187.8)
Allowable load when table clamped	F N (lbf)	1,960 (439)
	FxL Nm (ft lbs)	80 (59)
	FxL Nm (ft lbs)	980 (722)
*Other motors & rpm available • specification subject to change without notice • Dimensions = mm

TTNC-101- 4 ACCURACIES

Inspection Items • Dimensions = mm		TTNC-101-4
Table top flatness (concave)	OAL	-
Table top runout	-	0.015
Difference between average heights of both tables	at 0° position	0.02
Difference between distances between frame standard face and both table tops	at 90° position	0.02
Parallelism of table top to frame bottom	OAL	0.015
Parallelism of tilt axis center to frame bottom	OAL	0.02
Center bore runout	Spindle nose	0.01
Tilting accuracy (arc sec)	0° ~ +90°	±30
Indexing accuracy (arc sec)	-	±30
Table center distance	-	±0.02
Difference between both center heights	at 90° position	0.02
Parallelism of table top to frame bottom guide blocks	OAL at 90° position	0.015