features & advantages
Control Series angle heads are designed to be used on machining centers equipped with automatic tool changers. The orientation ring and the arrester arm, which carries the arrester pin, can both be rotated through 360°. This allows easy adjustment of the drive taper relative to a stop block mounted on the machining center spindle housing.
|Max. RPM||4,000 per min||4,000 per min||4,000 per min|
|Max. Axial Load||450 N||480 N||715 N|
|Torque||6 Nm||18 Nm||32 Nm|
|Weight||4.2 kg||7 kg||13 kg|
(Ø 1 - 13 mm)
(Ø 2 - 20 mm)
360° VIEW OF THE ANGLE HEAD
CLICK ON THE SPIN TO ZOOM
Determine if the TCUcn is the best fit for you.
ASK AN EXPERT